Char-Lynn Eaton 101-1090-009
Char-Lynn Eaton 101-1090-009 Hydraulic Gerotor Spool Valve Motor - H-Series, 4.50 in³/r, 2-Bolt Flange - 3.25 in Pilot
Specifications
| series: |
H-Series |
intermittent pressure: |
2400 psi |
|
| displacement: |
4.50 in³/r |
intermittent torque: |
1401 in-lbs |
|
| maximum rpm-continuous: |
760 rpm |
replacement buna seal kit - sold separately: |
007 Design - 60023-000, 008 & 009 Design - 60540-000 |
|
| continuous torque: |
1044 in-lbs |
replacement viton seal kit - sold separately: |
007 Design - 60032-000, 008 & 009 Design - 60544-000 |
|
| continuous pressure: |
1800 psi |
replacement bearing race - sold separately: |
007, 008 & 009 Design - 7462-000 |
|
| continuous flow rate: |
15 gpm |
replacement needle thrust bearing: |
007, 008 & 009 Design - 7537-000 |
|
| motor port type: |
Manifold (5/16-18 UNC Bolt Threads) |
replacement output shaft - sold separately: |
007, 008 & 009 Design - 7360-002 |
|
| motor port size: |
Manifold |
replacement gerotor - sold seprately: |
009 Design - 8277-024 |
|
| shaft type: |
Splined |
replacement drive - sold separately: |
009 Design - 22250-000 |
|
| output shaft size: |
1 in SAE - 6B Spline |
replacement short cap screw (mounting end) - sold separately: |
007, 008 & 009 Design - 16292-088 - 4 Required |
|
| mounting type: |
2-Bolt Flange - 3.25 in Pilot |
replacement long cap screw (cap end) - sold seprately: |
009 Design - 16294-162 - 7 Required |
|
| seal type: |
Standard |
replacement rear housing - sold separately: |
009 Design - 22230-003, 008 & 007 Design - 7359-003 |
|
| case drain: |
No Case Drain |
replacement mounting flange - sold separately: |
009 & 008 Design 22000-001, 007 Design 7463-000 |
|
| inlet and outlet port size: |
Manifold Ports 5/16-18 UNC Thread |
weight: |
11.5 lbs |
|
| actual port type: |
Manifold (.3125-18 Unc Thd.) |
recommended fluids: | Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature, | |
| actual output shaft: |
25.4 [1.00] Sae 6B Spline With 1/4-20 Threaded Hole |
recommended filtration: |
Per Iso Cleanliness Code. Level 18/13 |
|
| actual mounting flange: |
2 Bolt Std: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Mounting |
repair manual#: |
7-117 |
|
| maximum operating temperature: |
180 °F |
repair parts drawing#: |
6-121 |
|
| overall height: |
133.9 mm |
manufacturer product page: | Click here | |
| overall length: |
142.3 mm |
manufacturer catalog: | Click here | |
| overall width: |
98.3 mm |
parts and repair manual: | Click here | |
| intermittent flow rate: |
18 gpm |
product brochure: | Click here |